RE202 Rotary Evaporator

The vacuum controller is equipped with a color LCD screen, and the operating status can be judged by color. Three operating modes are used for different applications, reducing the risk of bumping.

The rotary evaporator and the vacuum pump are operated in one-button linkage, wirelessly connected, to control the vacuum pump N820G or other designated vacuum pumps.

There is no need for additional wiring, which improves the flexibility of layout, and the design is simple and space-saving.

The cooling pipe is installed at a low height and can be easily stored in a fume hood.

Using a DC servo motor, the rotation speed can be set in the range of 5 to 315 rpm.

The effective lifting distance of the rotary head is 200mm.

There are forward/reverse/auto-reverse operation modes, which can automatically switch the rotation direction cycle.

Rotary head, operation panel, glass set, water bath/oil bath can be set up in reverse left and right.

The operation panel can be rotated freely and is displayed with white LEDs for good visibility.

It adopts wide voltage and can be used on 100~230V power supply.

A glass suit with double serpentine structure can handle low to high boiling point substances.

Type B provides stable recovery rates from small to large quantities.

In order to prevent condensation, the surface of each cooling pipe is equipped with thermal insulation material as standard.

Type B has a protective cover on the feed hose to prevent backflow of condensed liquid into the flask.